美高梅信誉盘口-4688美高梅游戏官网

美高梅信誉盘口-4688美高梅游戏官网

Water Filtration Systems

RiTech Water Systems Canada



Water contains sediments, organic and inorganic contaminants, sand, turbidity and other dissolved solids.The ‘MFG’ Series automatic backwashing media filter system is designed to provide the highest quality in water filtration equipment while covering a wide variety of industrial applications including turbidity reduction, iron removal, and chlorine removal. A broad range of filter media and component options are offered to fit your exact specifications.

We customize water filtration systems for these contaminants.

1. Acid Neutralizer Filters


Acidic water can cause corrosion problems as well as drastically shorten the life of equipment and fixtures. When acid water (pH below 6.5) is passes through the filter, the filter media will increase the pH to a neutral level. The media slowly dissolves over a period of time and will eventually need to be re-filled. Refilled intervals depend on the initial pH of water and water consumption.

Features:


• The specialized filter is designed to neutralize water at the point of entry
• pH balanced, clean water that is great for all applications
• No more blue-green stains and corrosive acidic water
• Enjoy naturally balanced and alkaline water
• Customized blend of pH media available for your specific pH water requirement

Options Available :


• Skid mounted, pre-piped, pre-wired systems
• Multi-tank system configurations (twin, triple, quad)
• Fleck XT/NXT digital control timers
• ASME stamped pressure vessels (18” dia. & higher)
• Inlet/Outlet pressure gauges and sample valves
• Differential pressure switch backwash cycle
• Separate source backwash cycle
• Recirculation pumps (cooling towers)
• Backwash water supply pumps
• Alternate filter media (Birm, Filter-AG, Calcite)
• RO lockout switch
• Greensand intermittent regenerate tank systems
• Greensand continuous regeneration systems




2. Sediment Removal Filters


Sedimentation can cause piping and control valves to clog with dirt and debris, reducing water flow. This can cause frequent equipment failure.

Features:


• The specialized filter is designed to remove sediment, dirt, debris and reduce turbidity
• Various sizes and styles available
• Up to 5 micron filtration
• Reduces pressure drop and provides a higher flow rate
• Fully automatic, user friendly and programmable backwashing filter
• Chemical free system
• Super capacitor stores program in memory so that it is not lost due to power interruption

Options Available :


• Skid mounted, pre-piped, pre-wired systems
• Multi-tank system configurations (twin, triple, quad)
• Fleck XT/NXT digital control timers
• ASME stamped pressure vessels (18” dia. & higher)
• Inlet/Outlet pressure gauges and sample valves
• Differential pressure switch backwash cycle
• Separate source backwash cycle
• Recirculation pumps (cooling towers)
• Backwash water supply pumps
• Alternate filter media (Birm, Filter-AG, Calcite)
• RO lockout switch
• Greensand intermittent regenerate tank systems
• Greensand continuous regeneration systems




3. Iron/Sulfur Removal Filters


Iron problem is the direct result of an infestation of iron bacteria. These bacteria do not present a health hazard but can stain fixtures, clothes as well as clog pipes and valves. Sulfur gases in the water can cause an unpleasant, rotten egg odor when using water for drinking, washing and utility purposes.

Various water treatment methods can be used to resolve this problem
a) Air Injection Birm Filters: These iron filters use the oxygen in the air to oxidize iron and hydrogen sulfide in the water.
b) Manganese Greens and Filter: The manganese greens and filter uses potassium permanganate to replenish oxygen on the greensand. Continued successful operation requires proper regeneration.

Features:


• Specialized custom-built filter designed to eliminate iron, hydrogen sulfide and manganese from water supply
• Fully automatic and adjustable backwashing filters
• Low electricity consumption
• User friendly programmable regeneration
• Power cell memory retains all settings for weeks (except current time)
• Non-corrosive, UV resistant, fibre reinforced polymer valve body
• Double back wash feature
• Tank working pressure at 20-125 psi and hydrostatic tested at 300 psi


Options Available :


• Skid mounted, pre-piped, pre-wired systems
• Multi-tank system configurations (twin, triple, quad)
• Fleck XT/NXT digital control timers
• ASME stamped pressure vessels (18” dia. & higher)
• Inlet/Outlet pressure gauges and sample valves
• Differential pressure switch backwash cycle
• Separate source backwash cycle
• Recirculation pumps (cooling towers)
• Backwash water supply pumps
• Alternate filter media (Birm, Filter-AG, Calcite)
• RO lockout switch
• Greensand intermittent regenerate tank systems
• Greensand continuous regeneration systems




4. Chlorine Removal Filter


Chlorine and other organic gases will give an unpleasant taste and odor in water. It can also react with the salts in water and pipingto damage fixtures and other plumbing.Activated carbon and KDF filters are the best way to eliminate this problem.

Features:


• Point of entry filtration system will provide you and your businesswith an unlimited supply of clean water
• Improved water taste and clarity without any bad chemical odors
• Custom built filter for personal water requirements
• Fully automatic, user friendly and programmable backwashing filter
• Chemical free system
• Low electrical consumption
• Large, blue, back-lit LCD display
• Super capacitor stores program in memory so that it is not lost due to power interruption
• Non-corrosive, UV resistant, fibre reinforced polymer valve body
• Up flow/down flow regeneration cycle
• Electrical rating: 12V DC
• Tank working pressure at 20-125 psi and hydrostatic tested at 300 psi

Options Available :


• Skid mounted, pre-piped, pre-wired systems
• Multi-tank system configurations (twin, triple, quad)
• Fleck XT/NXT digital control timers
• ASME stamped pressure vessels (18” dia. & higher)
• Inlet/Outlet pressure gauges and sample valves
• Differential pressure switch backwash cycle
• Separate source backwash cycle
• Recirculation pumps (cooling towers)
• Backwash water supply pumps
• Alternate filter media (Birm, Filter-AG, Calcite)
• RO lockout switch
• Greensand intermittent regenerate tank systems
• Greensand continuous regeneration systems